initial commit

This commit is contained in:
jhChun
2026-04-08 16:58:54 +09:00
commit 82e33d8bf9
2578 changed files with 1590432 additions and 0 deletions

View File

@@ -0,0 +1,123 @@
/**
* Copyright (c) 2016 - 2021, Nordic Semiconductor ASA
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form, except as embedded into a Nordic
* Semiconductor ASA integrated circuit in a product or a software update for
* such product, must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* 4. This software, with or without modification, must only be used with a
* Nordic Semiconductor ASA integrated circuit.
*
* 5. Any software provided in binary form under this license must not be reverse
* engineered, decompiled, modified and/or disassembled.
*
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include "sdk_common.h"
#if NRF_MODULE_ENABLED(NRF_LOG) && NRF_MODULE_ENABLED(NRF_LOG_BACKEND_RTT)
#include "nrf_log_backend_rtt.h"
#include "nrf_log_backend_serial.h"
#include "nrf_log_str_formatter.h"
#include "nrf_log_internal.h"
#include "nrf_delay.h"
#include <SEGGER_RTT_Conf.h>
#include <SEGGER_RTT.h>
static bool m_host_present;
static uint8_t m_string_buff[NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE];
void nrf_log_backend_rtt_init(void)
{
SEGGER_RTT_Init();
}
static void serial_tx(void const * p_context, char const * buffer, size_t len)
{
if (len)
{
uint32_t idx = 0;
uint32_t processed;
uint32_t watchdog_counter = NRF_LOG_BACKEND_RTT_TX_RETRY_CNT;
do
{
processed = SEGGER_RTT_WriteNoLock(0, &buffer[idx], len);
idx += processed;
len -= processed;
if (processed == 0)
{
/* There are two possible reasons for not writing any data to RTT:
* - The host is not connected and not reading the data.
* - The buffer got full and will be read by the host.
* These two situations are distinguished using the following algorithm.
* At the begining, the module assumes that the host is active,
* so when no data is read, it busy waits and retries.
* If, after retrying, the host reads the data, the module assumes that the host is active.
* If it fails, the module assumes that the host is inactive and stores that information. On next
* call, only one attempt takes place. The host is marked as active if the attempt is successful.
*/
if (!m_host_present)
{
break;
}
else
{
nrf_delay_ms(NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS);
watchdog_counter--;
if (watchdog_counter == 0)
{
m_host_present = false;
break;
}
}
}
m_host_present = true;
} while (len);
}
}
static void nrf_log_backend_rtt_put(nrf_log_backend_t const * p_backend,
nrf_log_entry_t * p_msg)
{
nrf_log_backend_serial_put(p_backend, p_msg, m_string_buff, NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE, serial_tx);
}
static void nrf_log_backend_rtt_flush(nrf_log_backend_t const * p_backend)
{
}
static void nrf_log_backend_rtt_panic_set(nrf_log_backend_t const * p_backend)
{
}
const nrf_log_backend_api_t nrf_log_backend_rtt_api = {
.put = nrf_log_backend_rtt_put,
.flush = nrf_log_backend_rtt_flush,
.panic_set = nrf_log_backend_rtt_panic_set,
};
#endif //NRF_MODULE_ENABLED(NRF_LOG) && NRF_MODULE_ENABLED(NRF_LOG_BACKEND_RTT)