/*******************************************************************************
 * @file	main.c
 * @author	CandyPops Co.
 * @version	V1.0.0
 * @date	2022-09-05
 * @brief
 ******************************************************************************/

#include <stdint.h>
#include "boards.h"
#include "nrf_mbr.h"
#include "nrf_bootloader.h"
#include "nrf_bootloader_app_start.h"
#include "nrf_bootloader_dfu_timers.h"
#include "nrf_dfu.h"
#include "nrf_log.h"
#include "nrf_log_ctrl.h"
#include "nrf_log_default_backends.h"
#include "app_error.h"
#include "app_error_weak.h"
#include "nrf_bootloader_info.h"
#include "nrf_delay.h"

#define POWER_HOLD	NRF_GPIO_PIN_MAP(0,8)		// power hold port for medithings device

static void on_error(void)
{
    NRF_LOG_FINAL_FLUSH();

#if NRF_MODULE_ENABLED(NRF_LOG_BACKEND_RTT)
    // To allow the buffer to be flushed by the host.
    nrf_delay_ms(100);
#endif
#ifdef NRF_DFU_DEBUG_VERSION
    NRF_BREAKPOINT_COND;
#endif
    NVIC_SystemReset();
}


void app_error_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name)
{
    NRF_LOG_ERROR("%s:%d", p_file_name, line_num);
    on_error();
}


void app_error_fault_handler(uint32_t id, uint32_t pc, uint32_t info)
{
    NRF_LOG_ERROR("Received a fault! id: 0x%08x, pc: 0x%08x, info: 0x%08x", id, pc, info);
    on_error();
}


void app_error_handler_bare(uint32_t error_code)
{
    NRF_LOG_ERROR("Received an error: 0x%08x!", error_code);
    on_error();
}

/**
 * @brief Function notifies certain events in DFU process.
 */
static void dfu_observer(nrf_dfu_evt_type_t evt_type)
{
    switch (evt_type)
    {
        case NRF_DFU_EVT_DFU_FAILED:
        case NRF_DFU_EVT_DFU_ABORTED:
        case NRF_DFU_EVT_DFU_INITIALIZED:
            bsp_board_init(BSP_INIT_LEDS);
            bsp_board_led_on(BSP_BOARD_LED_0);
            break;
        case NRF_DFU_EVT_TRANSPORT_ACTIVATED:
            bsp_board_led_on(BSP_BOARD_LED_0);
            break;
        case NRF_DFU_EVT_DFU_STARTED:
            break;
        default:
            break;
    }
}


/**@brief Function for application main entry. */
int main(void)
{
    uint32_t ret_val;

    nrf_gpio_cfg_output(POWER_HOLD);
    nrf_gpio_pin_set(POWER_HOLD);		// The medithings device performs power hold when the power button is pressed for 3 seconds.
                                    // And then, The medithings device loads the bootloader.

    // Must happen before flash protection is applied, since it edits a protected page.
    nrf_bootloader_mbr_addrs_populate();

    // Protect MBR and bootloader code from being overwritten.
    ret_val = nrf_bootloader_flash_protect(0, MBR_SIZE);
    APP_ERROR_CHECK(ret_val);
    ret_val = nrf_bootloader_flash_protect(BOOTLOADER_START_ADDR, BOOTLOADER_SIZE);
    APP_ERROR_CHECK(ret_val);

    (void) NRF_LOG_INIT(nrf_bootloader_dfu_timer_counter_get);
    NRF_LOG_DEFAULT_BACKENDS_INIT();

    NRF_LOG_INFO("Inside main");

    ret_val = nrf_bootloader_init(dfu_observer);
    APP_ERROR_CHECK(ret_val);

    NRF_LOG_FLUSH();

    NRF_LOG_ERROR("After main, should never be reached.");
    NRF_LOG_FLUSH();

    APP_ERROR_CHECK_BOOL(false);
}

/**
 * @}
 */