jhchun
a1ad2a4b5b
- binary_tx_handler를 dr_binary_tx_safe로 전체 교체 (APP_ERROR_CHECK 제거) - data_tx_handler APP_ERROR_CHECK → DBG_PRINTF 교체 - memset/memcpy 하드코딩 크기를 define 상수로 교체 (버퍼 오버런 수정) - SERIAL_NO_LENGTH, HW_NO_LENGTH, PASSKEY_LENGTH를 main.h로 통합 - 미사용 HW 드라이버/EEPROM 코드 삭제, TWI를 i2c_manager.c로 통합 - EEPROM → FDS 전환, 코드 리뷰 현황 문서 추가 Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
153 lines
7.2 KiB
C
153 lines
7.2 KiB
C
/**
|
|
* Copyright (c) 2016 - 2021, Nordic Semiconductor ASA
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
#ifndef PCA10056_H
|
|
#define PCA10056_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "nrf_gpio.h"
|
|
|
|
// LEDs definitions for PCA10056
|
|
#define LEDS_NUMBER 2
|
|
|
|
#define LED_GR NRF_GPIO_PIN_MAP(0,12) //Green LED for Advertise
|
|
#define LED_YL_TEST NRF_GPIO_PIN_MAP(0,29) // Yello LED for Function 260311
|
|
|
|
#define LEDS_ACTIVE_STATE 0
|
|
#define LEDS_LIST { LED_GR, LED_YL_TEST }
|
|
#define LEDS_INV_MASK LEDS_MASK
|
|
#define BSP_LED_0 LED_GR
|
|
#define BSP_LED_1 LED_YL_TEST // 260311
|
|
|
|
#define BUTTONS_NUMBER 3
|
|
|
|
#define BUTTON_1 19 //24 change for eeprom 2025.03.24 //Dummy Pin
|
|
#define BUTTON_2 23 //Bonds Erase & Reset 2025.05.06 18-->19 use rest pin as trigger signal
|
|
#define BUTTON_3 NRF_GPIO_PIN_MAP(1,8) //Power Button
|
|
#define BUTTON_PULL NRF_GPIO_PIN_PULLUP
|
|
|
|
#define BUTTONS_ACTIVE_STATE 0
|
|
|
|
#define BUTTONS_LIST { BUTTON_1, BUTTON_2, BUTTON_3 }
|
|
|
|
#define BSP_BUTTON_0 BUTTON_1
|
|
#define BSP_BUTTON_1 BUTTON_2
|
|
#define BSP_BUTTON_2 BUTTON_3
|
|
|
|
#define RX_PIN_NUMBER 7
|
|
#define TX_PIN_NUMBER 6
|
|
#define CTS_PIN_NUMBER 21 //24 change for eeprom 2025.03.24
|
|
#define RTS_PIN_NUMBER 27
|
|
#define HWFC true
|
|
|
|
#define BSP_QSPI_SCK_PIN 19
|
|
#define BSP_QSPI_CSN_PIN 17
|
|
#define BSP_QSPI_IO0_PIN 20
|
|
#define BSP_QSPI_IO1_PIN 21
|
|
#define BSP_QSPI_IO2_PIN 22
|
|
#define BSP_QSPI_IO3_PIN 23
|
|
|
|
|
|
// serialization APPLICATION board - temp. setup for running serialized MEMU tests
|
|
#define SER_APP_RX_PIN NRF_GPIO_PIN_MAP(1,13) // UART RX pin number.
|
|
#define SER_APP_TX_PIN NRF_GPIO_PIN_MAP(1,14) // UART TX pin number.
|
|
#define SER_APP_CTS_PIN NRF_GPIO_PIN_MAP(0,2) // UART Clear To Send pin number.
|
|
#define SER_APP_RTS_PIN NRF_GPIO_PIN_MAP(1,15) // UART Request To Send pin number.
|
|
|
|
#define SER_APP_SPIM0_SCK_PIN NRF_GPIO_PIN_MAP(0,27) // SPI clock GPIO pin number.
|
|
#define SER_APP_SPIM0_MOSI_PIN NRF_GPIO_PIN_MAP(0,2) // SPI Master Out Slave In GPIO pin number
|
|
#define SER_APP_SPIM0_MISO_PIN NRF_GPIO_PIN_MAP(0,26) // SPI Master In Slave Out GPIO pin number
|
|
#define SER_APP_SPIM0_SS_PIN NRF_GPIO_PIN_MAP(1,13) // SPI Slave Select GPIO pin number
|
|
#define SER_APP_SPIM0_RDY_PIN NRF_GPIO_PIN_MAP(1,15) // SPI READY GPIO pin number
|
|
#define SER_APP_SPIM0_REQ_PIN NRF_GPIO_PIN_MAP(1,14) // SPI REQUEST GPIO pin number
|
|
|
|
// serialization CONNECTIVITY board
|
|
#define SER_CON_RX_PIN NRF_GPIO_PIN_MAP(1,14) // UART RX pin number.
|
|
#define SER_CON_TX_PIN NRF_GPIO_PIN_MAP(1,13) // UART TX pin number.
|
|
#define SER_CON_CTS_PIN NRF_GPIO_PIN_MAP(1,15) // UART Clear To Send pin number. Not used if HWFC is set to false.
|
|
#define SER_CON_RTS_PIN NRF_GPIO_PIN_MAP(0,2) // UART Request To Send pin number. Not used if HWFC is set to false.
|
|
|
|
|
|
#define SER_CON_SPIS_SCK_PIN NRF_GPIO_PIN_MAP(0,27) // SPI SCK signal.
|
|
#define SER_CON_SPIS_MOSI_PIN NRF_GPIO_PIN_MAP(0,2) // SPI MOSI signal.
|
|
#define SER_CON_SPIS_MISO_PIN NRF_GPIO_PIN_MAP(0,26) // SPI MISO signal.
|
|
#define SER_CON_SPIS_CSN_PIN NRF_GPIO_PIN_MAP(1,13) // SPI CSN signal.
|
|
#define SER_CON_SPIS_RDY_PIN NRF_GPIO_PIN_MAP(1,15) // SPI READY GPIO pin number.
|
|
#define SER_CON_SPIS_REQ_PIN NRF_GPIO_PIN_MAP(1,14) // SPI REQUEST GPIO pin number.
|
|
|
|
#define SER_CONN_CHIP_RESET_PIN NRF_GPIO_PIN_MAP(1,1) // Pin used to reset connectivity chip
|
|
|
|
// Arduino board mappings
|
|
#define ARDUINO_SCL_PIN 27 // SCL signal pin
|
|
#define ARDUINO_SDA_PIN 26 // SDA signal pin
|
|
#define ARDUINO_AREF_PIN 2 // Aref pin
|
|
|
|
#define ARDUINO_13_PIN NRF_GPIO_PIN_MAP(1, 15) // Digital pin 13
|
|
#define ARDUINO_12_PIN NRF_GPIO_PIN_MAP(1, 14) // Digital pin 12
|
|
#define ARDUINO_11_PIN NRF_GPIO_PIN_MAP(1, 13) // Digital pin 11
|
|
#define ARDUINO_10_PIN NRF_GPIO_PIN_MAP(1, 12) // Digital pin 10
|
|
#define ARDUINO_9_PIN NRF_GPIO_PIN_MAP(1, 11) // Digital pin 9
|
|
#define ARDUINO_8_PIN NRF_GPIO_PIN_MAP(1, 10) // Digital pin 8
|
|
|
|
#define ARDUINO_7_PIN NRF_GPIO_PIN_MAP(1, 8) // Digital pin 7
|
|
#define ARDUINO_6_PIN NRF_GPIO_PIN_MAP(1, 7) // Digital pin 6
|
|
#define ARDUINO_5_PIN NRF_GPIO_PIN_MAP(1, 6) // Digital pin 5
|
|
#define ARDUINO_4_PIN NRF_GPIO_PIN_MAP(1, 5) // Digital pin 4
|
|
#define ARDUINO_3_PIN NRF_GPIO_PIN_MAP(1, 4) // Digital pin 3
|
|
#define ARDUINO_2_PIN NRF_GPIO_PIN_MAP(1, 3) // Digital pin 2
|
|
#define ARDUINO_1_PIN NRF_GPIO_PIN_MAP(1, 2) // Digital pin 1
|
|
#define ARDUINO_0_PIN NRF_GPIO_PIN_MAP(1, 1) // Digital pin 0
|
|
|
|
#define ARDUINO_A0_PIN 3 // Analog channel 0
|
|
#define ARDUINO_A1_PIN 4 // Analog channel 1
|
|
#define ARDUINO_A2_PIN 28 // Analog channel 2
|
|
#define ARDUINO_A3_PIN 29 // Analog channel 3
|
|
#define ARDUINO_A4_PIN 30 // Analog channel 4
|
|
#define ARDUINO_A5_PIN 31 // Analog channel 5
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // PCA10056_H
|